Westfield parts and upgrades

WESTFIELD PART NO: 3512090

DESCRIPTION:

Clear side indicator
Suitable for application on front cycle wings
These replaced old orange ford style indicators that fail iva when rules changed due to not being visible enough when testing

WESTFIELD PART NO: 2310046

DESCRIPTION:

Brake pipe kit to suit zetec models plus others

WESTFIELD PART NO: 3233027

DESCRIPTION:

Westfield Aluminium Gear Knob.

fixes to gear lever with grub screws.

will fit all Westfield models.

Adds just another nice finishing touch to your car.

WESTFIELD PART NO: 2311145

DESCRIPTION:

Westfield XI Clutch Hose
Please note that the banjo bolt fitting is 3/8 UNF to suit most cylinders supplied by Westfield.
If you need an M10 fitting then this will need to be purchased and is in the related products at bottom of page.

WESTFIELD PART NO: 5590001

DESCRIPTION:

Side screen Hinge Kit
Hinge kit includes base plates to fix to pillar, hinge brackets for both sides and washers bolts and domed nuts.
All hinges are a stainless steel finish.
Current style pillars are those that are in second photo were the hinge plate is screwed onto the pillar which allows the pins to slot in place.

WESTFIELD PART NO: 5235010

DESCRIPTION:

Steering Wheel Centre Pad
Pad will fit our standard steering wheel only and not the Momo wheel
IVA Requirement

WESTFIELD PART NO: 5222022B

DESCRIPTION:

Westfield Outer Steering Column Tube
Used on 7 style cars, not suitable for the XI
End to end measurement is 59.5cm

WESTFIELD PART NO: 3724001

DESCRIPTION:

Front wheel bearing to suit aluminium front hubs.
This kit will also suit the original cortina hubs.
Kit includes bearings, seal and split pin.

WESTFIELD PART NO: 4015008

DESCRIPTION:

Fuel pump inertia switch
Used as a safety device to stop the flow of fuel during an accident

WESTFIELD PART NO: 3514043B

DESCRIPTION:

ZK Body RH Headlamp Bracket
* This product had a slight design change, meaning it will not fit ZK style vehicles of a certain age, 20 years and over. Please see last image for old style brackets.

*** This product had a second slight design change roughly 15 years ago. The mounting plate where the headlamps mounts to was raised slightly for IVA. If you are replacing a damaged unit, you may need to replace both sides.

WESTFIELD PART NO: 3514042B

DESCRIPTION:

ZK Body LH Headlamp Bracket
* This product had a slight design change, meaning it will not fit ZK style vehicles of a certain age, 20 years and over. Please see last image for old style brackets.

*** This product had a second slight design change roughly 15 years ago. The mounting plate where the headlamps mounts to was raised slightly for IVA. If you are replacing a damaged unit, you may need to replace both sides.

WESTFIELD PART NO: 5590002

DESCRIPTION:

Side screen Hinge Kit
Hinge kit includes base plates to fix to pillar, hinge brackets for both sides and washers bolts and domed nuts.
All hinges are a stainless steel finish.
Early style pillars are those that are in second photo were the pins drop into the pillar without use of plain hinge being bolted on

WESTFIELD PART NO: 3750003

DESCRIPTION:

Bottom ball joint 3rd generation only.

Suitable for all Westfield vehicles that are fitted with 3rd generation wishbones.

Ball joint is pressed into the Wishbone, please be mindful a press is required for installation.

WESTFIELD PART NO: N6131013

DESCRIPTION:

50mm New Westfield Enamel Badge
Badge is the new Westfield/Union Jack logo
Thread on back of badge is M4

WESTFIELD PART NO: 3715053

DESCRIPTION:

Rear Anti Roll Bar Block
Used on both FW and ZK Rear anti roll bars.

WESTFIELD PART NO: 1710064

DESCRIPTION:

Silencer Fitting Kit - 5" 

Will fit  5" silencer only

Left or right handed

Please note the rubber in the image has now been replaced by the new round rubber mount instead of the rectangular shape 1776047.

WESTFIELD PART NO: GEL1

DESCRIPTION:

50ml tub of gel coat of a colour of your choosing
DOES NOT COME WITH HARDENER.MEKP ORGANIC CATALYST IS THE HARDNER REQUIRED FOR GEL COAT. HARDENER WILL NEED TO BE PURCHASED AT A LICENSED RETAILER.
Please select colour from options available.
Please also bear in mind that in recent years there has been big changes in the laws and contents of GRP making it difficult to guarantee 100% colour matches, we will supply panels and gelcoat in the closest match we possibly can.

WESTFIELD PART NO: 0871057

DESCRIPTION:

Hose - Fuel Cap Hose
Image shows the ZK and FW sizes, please leave a note if you have ZK or FW bodywork

WESTFIELD PART NO: 4651001

DESCRIPTION:

Chrome Wiper Arm 155mm
To suit standard and wide body Windscreens not the tall screens

WESTFIELD PART NO: 3752002

DESCRIPTION:

Bottom ball joint (sold as an individual unit )
Please note these have a two bolt flange fixing, if your Westfield has the four bolt flange these are not a direct replacement.
***If you have the four bolt flange ball joints on your Westfield and cannot find a suitable replacement in the aftermarket sector, you will need to upgrade to the newer version of the standard track wishbone - 2 x  3711052B. You will also require 2 x 3752002. Lastly you will require replacement 4 x suspension bush - various options, please search for 'suspension bush'.
2 bolt flange style fitment wishbones are a direct replacement for the older 4 bolt flange wishbones.
***Will NOT suit 3rd generation wishbones.